
Garages and Sheds Ulverstone
Steel garages, workshops, barns and farm sheds, designed for your Ulverstone block and engineered for Tasmania's coastal climate. Made from 100% Australian BlueScope steel, ShedSafe accredited, and quoted within 24 hours.
Residential, rural and commercial buildings Ulverstone
Ulverstone sits at the mouth of the Leven River on Tasmania's Central Coast, a short run of towns strung along the water from Turners Beach through to Penguin. Most people building here want the same practical thing: a solid garage or shed that keeps the cars, the gear and the toys out of the salt air, looks tidy on the block, and lasts. That is exactly what we do.
Tassie Sheds designs and builds custom steel buildings across Ulverstone and the surrounding Central Coast, from Turners Beach, Leith and Forth to Penguin, Gawler and the lifestyle blocks up the Leven Valley. Every building is made from 100% Australian BlueScope steel and adjustable in increments as fine as 1mm, so it fits your driveway, your setback and the space you actually have, rather than a fixed catalogue size.
A good value shed is not always about price. Two Ulverstone quotes for the same size can be thousands apart, and the difference usually hides in what you cannot see once it is up: the size and thickness of the steel, whether it is genuine BlueScope or cheaper imported coil, and whether the shed has been engineered for your site's wind and salt exposure.
Ask about our free design service, request a written quote, or call the team on (03) 6165 0204. Our head office is at 28 Gormanston Road, Moonah TAS 7009.
Garages, Carports and Garaports Ulverstone
Garages are the bread and butter of what people ask us for around Ulverstone, and we supply a full range of single lock-ups, double and triple garages, and garaports that pair an enclosed garage with an open carport bay off the front for the boat or the caravan. If you only need cover rather than four walls, a standalone steel carport does the job at a lower cost and works just as well over an outdoor area.
Because every design is fully customisable, you decide the shape. Lift the wall height for a caravan or a hoist, widen a bay for the work ute, add a lean-to for firewood, or fit a mezzanine for extra storage upstairs. Roller doors, personal access doors, windows, skylights, whirlybirds and insulation all build in wherever you want them.
You can start the design yourself in our online 3D shed designer at designer.tassiesheds.com.au. Set it up the way you want, send it through, and we will have a written quote back within 24 hours. The designer carries no live pricing, so there is no obligation, just your design and a real figure to compare.
Workshops, barns and farm sheds too.
Workshops and Small-Acreage Sheds Ulverstone
A purpose-built workshop gives you a dry, secure, well-lit space to work in, whether it is a home mechanic's bay with a hoist, a woodworking setup, or a spot to run a side business.
For the lifestyle and small-acreage blocks around Gawler, Sprent, North Motton and up toward Preston, a compact farm shed or open-front shed keeps the ride-on, the firewood, the trailer and the fencing gear under cover. Mix open and enclosed bays, add internal walls to separate a clean area from the messy end, and specify the door sizes and ventilation you need. Everything is framed in BlueScope GALVASPAN®, clad in ZINCALUME® or the COLORBOND® range, and ShedSafe accredited.
If you do run a working property, our farm sheds scale right up, with spans to 25 metres and heights to 8 metres for machinery, hay and stock, engineered to the site just the same.
Barns and Rural Buildings Ulverstone
For the mixed and hobby farms in the Ulverstone hinterland, a steel barn is one of the most flexible buildings you can put up. We build both American-style barns, with a raised centre and drop-down awnings, and Aussie-style barns, where the awnings come off at eave height for a lower, cleaner line.
Barns suit the Central Coast because one building covers a lot of jobs at once. Keep the centre enclosed and secure for the workshop or feed store, leave one awning open for machinery and enclose the other for stock, and set the awning widths and heights to match what goes under each. Add roller doors, a mezzanine or tack rooms as you need them.
Building for the Coast: Salt and COLORBOND® Ultra
This is the part that matters most on the Central Coast. Ulverstone, Turners Beach, Penguin and the beachside blocks all cop salt-laden air off Bass Strait, and salt is what shortens the life of a poorly specified shed. There are two things that make the difference: the quality of the steel, and choosing the right coating for how close you are to the water.
Every building we make is framed and clad in genuine Australian BlueScope steel, so you start from a proper base. On coastal and beachside blocks we will often recommend COLORBOND® Ultra, which is made specifically for the higher salt exposure of foreshore and near-coastal sites and holds its finish far longer there than a standard coating would. Inland, up the Leven Valley and out of the salt, standard COLORBOND® or ZINCALUME® is usually all you need. Because we are ShedSafe accredited and design to your actual site, we will steer you to the right specification for your block rather than over-selling or under-doing it.
You still get the full look you are after: 22 standard COLORBOND® colours to match the house, the fence or the roofline, in a deep-pan five-rib or traditional corrugated profile.
Building in Ulverstone: Council and Approvals
Ulverstone and the towns around it sit under a single council, Central Coast Council, which covers Ulverstone, Penguin, Turners Beach, Forth, Gawler, Leith and the rural areas between. That makes the approvals picture more straightforward here than in some regions, but the same basic rule applies.
As a general guide, a shed of 36 square metres or under is often exempt from needing a building permit, while anything larger will usually need building approval, and depending on the zone and where it sits on the block it may need planning approval too. Rural and farm buildings can have their own exemptions. A double garage sits right on that 36 square metre mark, which is a good reason to check before you commit. We always recommend a quick chat with Central Coast Council or a building surveyor early so you know exactly which category your building falls into. Every Tassie Sheds building comes with signed engineered plans prepared for council, and our free CBOS Shed Building Cheat Sheet explains the categories in plain English.
Areas We Serve and Delivery
We build and deliver right across Ulverstone and the Central Coast, including Turners Beach, Leith, Forth, Gawler, West Ulverstone and Penguin, and inland to Sprent, North Motton, Preston and the Leven Valley blocks. Delivery is free across most of Tasmania, so for the vast majority of Central Coast addresses there is no delivery charge to add to your quote.
We supply our buildings in kit form and do not install them ourselves, but we can recommend trusted installers and concreters across the Central Coast to get your slab down and your shed up if you would rather not tackle it yourself.
Why Choose Tassie Sheds in Ulverstone
- Made from 100% Australian BlueScope steel, manufactured in Tasmania (Hobart and Launceston), and ShedSafe accredited.
- Engineered to your coastal site, with COLORBOND® Ultra recommended where the salt exposure calls for it.
- Fully customisable down to 1mm increments, with 22 COLORBOND® colours plus ZINCALUME®.
- A written quote within 24 hours and no pushy sales calls, from a Tasmanian business since 2014.
Ulverstone shed questions, answered.
Where do I go to get permission to build a shed?
Start with your local council's planning department. For Ulverstone and the towns around it that is Central Coast Council. As a rough guide a shed of 36 square metres or under is often exempt, while larger buildings usually need approval, so it is worth a quick call before you commit. Every building we supply comes with signed engineered plans for your surveyor or council.
How much does a shed cost in Ulverstone?
It depends mostly on the size (height, width and length), the cladding and doors you choose, any extras, and your site conditions. Rather than a fixed price list, we offer a free design service and an itemised written quote back within 24 hours, so you can see exactly what you are paying for. You can design your shed yourself in our online 3D designer and send it through, and remember that the cheapest quote is not always the best value once you account for steel quality and site engineering.
What will the shed be used for?
This is the first thing worth pinning down, because it drives the size and layout. Think about what goes in it now and in a few years: cars, a boat or caravan, tools, a workshop bench, feed or machinery. Getting the height and bay widths right from the start is cheaper than wishing you had gone bigger, and because every design is custom we can build in the room you will actually grow into.
What's the most popular COLORBOND® colour?
Monument and Monument Matt are the most popular right now, along with traditional favourites like Classic Cream and Pale Eucalypt. You have 22 standard COLORBOND® colours to choose from. On coastal Ulverstone blocks we will often recommend COLORBOND® Ultra, which is built to handle the salt exposure near the water.
Can you build a shed on piers or a slab?
Yes. We offer the flexibility of installing your shed or garage on concrete piers or on a concrete slab, or a slab-and-pier combination, depending on your site, your budget and how you will use the building. We supply the building in kit form and can recommend concreters on the Central Coast if you need one.
Do coastal Ulverstone sheds need special protection from salt?
They benefit from it. Blocks near the water at Ulverstone, Turners Beach and Penguin get salt-laden air off Bass Strait, which shortens the life of a poorly specified shed. We build in genuine BlueScope steel and, on foreshore and near-coastal blocks, will usually recommend COLORBOND® Ultra for its extra resistance to salt. Further inland, standard COLORBOND® is generally fine.
Can you build a workshop or garage for a lifestyle block up the Leven Valley?
Yes. A lot of what we build around Gawler, Sprent, North Motton and Preston is exactly that: workshops, garages and small farm sheds for a few acres. We design the layout, bay widths and door sizes around how you will use it, all in BlueScope steel and ShedSafe accredited, and engineered to your site rather than a generic rating.
How long does delivery take to Ulverstone?
Most buildings are manufactured and delivered within 4 to 6 weeks, depending on the design and the factory schedule. Delivery is free across most of Tasmania, so for the great majority of Central Coast addresses there is no delivery cost added to your quote.
Building near Ulverstone?
Let's quote the steel.
Start with our free design service, a written quote or a quick phone call, and we will design the right building for your block with no pushy sales calls. Made Tassie Tough.

